Orphek Atlantik v4 Gen2 with OR2 Light Bar : Setup Guide to Build your Own! (A Clean Setup)

Build your own clean Orphek Atlantik v4 Gen2 light setup.

As I’ve received a few requests for the build details, I decided to put together this video to answer a lot of the questions about how I put together the light. Let me first start off by saying that as it’s been a while since the light was put together, I’m going through my pictures to recall what was done and how it was put together.

Please watch the video for details on that.

NOTE: This was not my idea. I was inspired by an image that I saw on Orphek’s website when I was trying to get mine setup. That image was mounted on the tank rim itself using the AI legs. I, on the other hand, decided to hang my setup because the legs were plastic and I was afraid it would not support the weight of the lights. This video will get you up to 80 percent done. I did not go through what is needed for each small step. This video basically gives you an idea of what I did along the way. If you need clarification of a specific process, feel free to leave a comment. Here are the parts that will need to be purchased. Order what you need as they come in different quantity packets. All other parts you should have already.

** I make a commission if you purchase from the links below. These purchases help support the channel so I can continue making videos. Thank you for your support!

** Parts Needed **

1. Light Rail: post a comment with your email and I will you if it’s still available

2. Orphek Replacement Long Screws https://amzn.to/3aP84Na

3. Main nut to hold the Orphek together https://amzn.to/3e0nO1M

4. Washer https://amzn.to/3bV9qX6

5. Top Nut to slide into Rail https://amzn.to/2yAiCBD

**LED LIGHT**

Orphek Atlantik V4 Gen2: https://reeflabs.net/orphek_atlantik_v4

** Camera Gear **

Sony A6600 Camera: https://amzn.to/2QkAXbQ

Rode VideoMicro: https://amzn.to/2TRNhm3

WeeBill S Gimbal: https://amzn.to/3aQsNzY